Browse all practice questions for the New Jersey Doubles and Triples Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

New Jersey Doubles and Triples Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • In an emergency steering situation with traffic on both sides and a blocked lane, what action is recommended?
  • Which component supplies air to the trailer brakes if the service line loses pressure?
  • What is one major hazard associated with longer tractor-trailer combinations that justifies looking farther ahead?
  • When driving a 100-foot twin trailer combination at 50 mph on a dry road with good visibility, how many seconds of space should you keep ahead?
  • Before coupling in a doubles/triples configuration, what should you inspect on the fifth wheel?
  • What is the final step when uncoupling twin trailers?
  • How does weight distribution affect stability in a double/triple rig?
  • Which statement about converter dollies is accurate?
  • How should you verify dolly and rear trailer alignment in a triple?
  • Why is it important to maintain extra space ahead when driving a multi-trailer combination?
  • Which mirrors are used to improve visibility on large trucks?
  • What is off-tracking and why is it important for doubles/triples?
  • Why are safety chains required when coupling a trailer?
  • Double and triple combination vehicles are ________ stable than other types of commercial vehicles.
  • Empty or lightly loaded trucks may have what issue?
  • In curves, off-tracking causes the rear wheels to follow a different path than the front; what does this mean for clearance?
  • How do you test a trailer's brakes while stationary?
  • If your landing gear is power operated, what should you check during your walk-around inspection?
  • During a brake test, which result confirms proper trailer brake engagement?
  • When turning right from one two-lane, two-way street into another, what is the recommended turning position for a long vehicle?
  • Some large trucks have convex or spot mirrors. What effect do these mirrors have on distance perception?
  • How do you test the dolly's connection to the middle trailer during coupling?
  • What is the proper order for connecting lines when coupling a trailer in a doubles/triples setup?
  • If a converter dolly has spring brakes, you release the brakes by:
  • Which action tests the coupling by pulling against the rear trailer's pin?
  • What impact does thorough pre-trip inspection have for doubles/triples?
  • Converter dollies: which statement is true?
  • For emergency braking you should:
  • Which statement about triple trailer coupling is true?
  • Name two primary components involved in coupling a trailer to a tractor in a doubles/triples setup.
  • What documentation is typically required for a doubles/triples endorsement in New Jersey?
  • Why must you inspect your double or triple combination vehicle more extensively than a single semitrailer?
  • What should you check about the dolly's landing gear before use?
  • To test the tractor protection valve, charge the trailer air brake system, turn off the engine, and what action should you perform?
  • The crack the whip effects trucks with trailers. Which part is most likely to tip over in a triple?
  • How should you test the coupling after connecting the converter dolly to the front semitrailer and the rear semitrailer to the converter dolly?
  • What is the low air warning and approximately when does it occur?
  • Which statement is true about emergency steering when obstructed on both sides?
  • Which statement describes the proper sequence for connecting lines when coupling a trailer in a doubles/triples setup?
  • Speed management: stopping distance at 40 mph compared to 20 mph is:
  • In a doubles/triples system, which component provides the middle connection point between trailers?
  • Which statement about quick steering movements and doubles or triples is true?
  • Which of the following best describes the braking characteristics of empty or lightly loaded doubles?
  • What does the doubles and triples endorsement authorize a CDL driver to operate?
  • Before you can supply air to the air tanks of a second trailer you need to:
  • Which statement best describes misadjusted brakes on a trailer?
  • What is the purpose of the dolly's landing gear?
  • What are the proper characteristics of the dolly's landing gear before coupling?
  • Which statement about emergency steering is true?
  • When is it inappropriate to drive with more than one trailer attached?
  • In double/triple trailer operation, brakes are normally controlled by which device?
  • What is the primary function of the fifth wheel in a doubles/triples configuration?
  • Driving a truck with double or triple trailers requires a driver to:
  • Which of the following demonstrates proper trailer height when backing a converter dolly under a trailer?
  • If the rear trailer appears misaligned with the dolly, what would you inspect?
  • What is the correct wheel chock procedure when uncoupling?
  • Antilock brakes (ABS) have been required on all converter dollies built since which date?
  • A safe driving speed on a curve for a normal tractor-trailer may be too fast for which configuration?
  • Which safety system is required on converter dollies built since 1998?
  • To connect to a second trailer that lacks spring brakes, which sequence is correct?
  • For a long combination vehicle on a curve, how should the driver approach the curve relative to other vehicles?
  • During a pre-drive check, which condition indicates an unsafe coupling between the dolly and the middle trailer?
  • When uncoupling the rear semi trailer, you should lower the converter dolly landing gear to what extent?
  • For coupled double or triple trailers, shut-off valves should be:
  • In a set of doubles, if a trailer wheel goes into a skid, what is most likely to occur?
  • Which orientation of parking space minimizes backing when handling doubles/triples?
  • What are glad hands and what is their function in a doubles/triples setup?
  • When coupling a set of doubles or triples, what is important regarding the dolly?
  • On slippery roads, which action is discouraged?
  • What is the primary reason for inspecting the double or triple combination vehicle more thoroughly?
  • What should you verify about trailer tire tread and overall condition?
  • What should you inspect regarding the trailer's suspension system?
  • After confirming normal air pressure, what is the next step in testing the trailer brakes?
  • To uncouple the rear trailer, the first thing you do is?
  • To connect to a second trailer without spring brakes, which sequence is correct?
  • Before coupling, what must you inspect on the kingpin area of the trailer?
  • Which maintenance consideration is crucial for the dolly-trailer linkage to ensure stability?
  • When braking abruptly with double trailers, what is recommended?
  • What is the best immediate action if you suspect a damaged or missing safety chain while driving?
  • In a double or triple inspection, which items should be checked on all trailers?
  • Which of the following is a sign of worn brake shoes on trailers?
  • When testing the coupling of double trailers, the landing gear of the rear trailer should be:
  • What is the primary purpose of cross-members on an attached dolly in a doubles/triples configuration?
  • Empty trucks may have poor traction due to what condition?
  • Converter dollies: which statement is true?
  • Which statement about seeing ahead is true?
  • If you must drive through deep puddles or flowing water, which of these should you not do?
  • When parking a double or triple combination, you should look for a space that you can pull straight through.
  • The pintle hook on a converter dolly engages with which part of the semitrailer?
  • What is the function of cross-members on an attached dolly?
  • How should you handle a trailer with a flat tire while driving doubles?
  • What is the best way to keep brakes from overheating while descending a steep grade?
  • How can you confirm that the coupling between the tractor and the trailer/dolly is locked?
  • Which statement best describes converter dollies and spring brakes?
  • What is the main safety hazard unique to doubles and triples?
  • During a nighttime pre-trip, which statement best describes the required condition of trailer lights, reflectors, and wiring?
  • During a pre-trip test, how can you verify that the trailer brakes are functioning?
  • If you want to couple a second trailer to your combination vehicle, secure it by using?
  • Checking your mirrors: which statement is true?
  • On a slippery road during the day, how much space should you keep ahead?
  • How can you identify a misaligned rear trailer with the dolly?
  • What is the role of the trailer emergency line?
  • What is the typical role of a spotter when maneuvering doubles or triples in tight spaces?
  • What is a major safety consequence of poor load securement?
  • What action should you take if a brake leak is found?
  • What are common brake-related defects to inspect on trailers?
  • After coupling, which of the following is a sign of a misconnected electrical or air line?
  • How can you be sure you supplied air to a second trailer?
  • Coupling a triple trailer is different from coupling other combinations because?
  • A recommended use of mirrors when driving doubles is to:
  • In order, the four steps to test your trailer's service brakes are as follows:
  • How can you minimize the risk of jackknifes when driving doubles/triples in windy conditions?
  • Which statement best describes scanning ahead while driving?
  • The converter dolly includes which feature?
  • With the hand valve on, you test the trailer brakes by opening the service line valve at the rear; what should you hear?
  • The first step in uncoupling a converter dolly is:
  • Which statement about curve speed for long configurations is correct?
  • Which statement about seeing ahead is true?
  • To confirm air supply to the second trailer, which action directly checks this on the trailer side?
  • Before connecting a converter dolly to a second or third trailer, what should you verify about the trailer height?
  • During a walk-around inspection of a double or triple trailer rig, you should be sure the converter dolly air tank drain valves are _____ and the pintle hook is _____.
  • In a doubles/triples system, what is a dolly?
  • What should you do if the trailer starts to swing or jackknife?
  • What should you check about the trailer lights and reflectors at night?
  • Which option correctly describes the alignment check when positioning the dolly under the rear trailer in a triple?
  • What are signs of improper brake shoe wear on trailers?
  • What is the purpose of the trailer emergency brake?
  • What is the recommended braking approach on downgrades for doubles/triples?
  • When should you check your mirrors while making a lane change?
  • Which sequence correctly recovers from trailer sway?
  • During a pre-trip, which observation would indicate a potential kingpin or locking issue?
  • During uncoupling of the rear semi trailer, lowering the converter dolly landing gear should accomplish what?
  • Which of the following is NOT a typical pre-trip check for the trailer's braking system in a doubles/triples setup?
  • What are signs of a damaged or defective wheel bearing on a trailer?
  • During a pre-trip walk-around, what two conditions should you verify on the converter dolly?
  • What practice best improves seeing ahead while driving?
  • Which statement is true about coupling the dolly to the trailer during doubles/triples?
  • If your test of the tractor protection valve is successful, what will the tractor protection valve control (trailer air supply control) do?
  • If a converter dolly remains under the second trailer and you unlock the pintle hook, what will probably happen?
  • Which of these will result in the best control on curves?
  • In a converter dolly, where is the fifth wheel located?
  • What should you do if you detect a brake chamber leak on a trailer?
  • A converter dolly consists of a ______ wheel and ________ axles.
  • During a walk-around of a multi-trailer setup, what would indicate a problem with the landing gear if it is power-operated?
  • What is the overall impact of proper alignment and clearance when operating a doubles/triples in restricted spaces?
  • True or False: Empty trucks may have poor traction due to bouncing and wheel lockup.
  • What is the key benefit of thorough training and practice for doubles/triples driving?
  • On slippery roads, which action is not advisable?
  • During coupling checks, what should you verify about the dolly connection?
  • What should you do with the converter dolly air tank drain valves during a walk-around inspection?
  • When a trailer wheel skids in a set of doubles, the most likely consequence is:
  • The tractor protection valve is designed to close automatically when air pressure falls into the range specified by the manufacturer, typically?
  • When connecting a converter dolly to a semitrailer, which component is typically engaged to secure the connection?
  • What is a jackknife in a combination vehicle?
  • Emergency braking technique for double trailers.
  • Which statement about managing space to the sides is true?
  • When you pull two or three trailers, you should look farther ahead because
  • How do you determine proper tire inflation on a trailer?
  • If the truck is too long to turn without swinging wide when turning right from one two-lane street into another, you should turn how?
  • A converter dolly with antilock brakes (ABS) is required to have?
  • During an inspection of a double or triple combination, check the usual things for any combination vehicle and check
  • Which observation would indicate a potential coupling problem at the kingpin?
  • What is a safe practice when uncoupling a twin trailer system?
  • What is the best way to stop all skids?
  • When coupling a second trailer, which of the following is true?
  • Which statement best describes the consequence of uneven weight distribution on a double or triple?
  • How should you approach a long trip with doubles/triples in terms of rest and fatigue management?
  • When does the driver's manual advise disconnecting the steering axle brakes to help keep the rig straight?
  • During a pre-trip, what should you look for in the kingpin area of the front trailer?
  • What should you verify about the trailer's air lines during a pre-trip?
  • In terms of following distance on slippery roads, the handbook says you should:
  • Which item is least relevant to a pre-trip inspection for coupling in a doubles/triples system?
  • How should you verify trailer tire inflation on a trailer?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy